|
|

|
|
EMPOL-ULTRAFLUID D |
DESCRIPTION |

|
The EMPOL-ULTRAFLUID D product line comprises brake fluids
that exceed the requirements for DOT-3 and DOT-4 grade established
by the Federal Motor Vehicle Safety Standdard N° 116 from the United
States of America. EMPOL-ULTRAFLUID D
300 is a mixture of glycols, clycol ether and corrosion
inhibitors. EMPOL-ULTRAFLUID D 401 is
a mixture of glycols, glycol ether, borated ether and corrosion
inhibitors. |
|
USES |

|
The EMPOL-ULTRAFLUID D product line was developed for usage in the
hydraulic brake systems of automotive vehicles such as passenger cars,
trucks, buses and motorcycles. The use of EMPOL-ULTRAFLUID D 300(DOT-3)
or EMPOL-ULTRAFLUID D401(DOT-4) must comply with the recommendations of
the vehicle manufacturer. |
|
PROPERTIES |

|
|
EMPOL UL TRAFLUID
D 300
|
REQUIREMENTS DOT-3 |
EMPOL ULTRAFLUID D
401
|
REQUIREMENTS DOT-4 |
Boiling Point 760mm Hg(°C) |
|
|
|
|
reflux |
230min |
230min |
260min |
230min |
wet
reflux |
140min |
140min |
160min |
155min |
pH at 25°C |
7.0 - 11.5 |
7.0 - 11.5 |
7.0 - 11.5 |
7.0 - 11.5 |
Kinematic Viscosity(cSt)
|
|
|
|
|
at -40°C |
1500max |
1500max |
1400max |
1800max |
at
100°C |
1.5min |
1.5min |
1.7min |
1.5min |
Water(wt%) |
0.15max. |
-
|
0.20max. |
-
|
Specific gravity, 20/20 °C |
1.03min. 1.07max. |
-
|
1.04min. 1.08max. |
-
|
|
Besides the properties described above, the EMPOL-ULTRAFLUID products exceed all
the requirements for
DOT-3 and DOT-4 grade established by the Federal Motor Vehicle Safety
Standard N° 116 from the United States of America. |
|
HANDLING AND STORAGE |

|
Products from the EMPOL-ULTRAFLUID D
line under normail conditions of handling and storage do not require
special precautions aas to the prevention of explosions, polymerization and
fire. They have a high flash point, a relatively low vapor pressure and
are not corrosive. Extinguishing agents are water, dry chemical, carbon
dioxide and foam for polar solvents. Since these products are
hygroscopic liquids they should be stored in an inert gas atmosphere, preferably of nitrogen. They can br stored in stainless steel, aluminum,
polyethylene and coated carbon steel tanks. EMPOL-ULTRAFLUID D
products have a low volatility at enviromental
temperature, consequently the risks of intoxcation through inhalation of
vapors are minimal. However, extended or repetitive exposure in
atmospheres saturated with their vapors should be avoided.
Extended
contact with the skin and principally with the eyes must also be
avoided. In the event of accidental contact proceed as
follows: eyes: wash immediately with plenty of water at least
15minutes; skin: wash the affected areas with plenty of water and
remove contaminated clothing; ingestion: seek medical care
urgently.
When handling the product we recommend the use of gloves,
PVC apron and safty goggles In the event of extended exposure to vapors
or exposure to high concentrations, we recommend the use of masks
designed for organic vapors. The shelf life of EMPOL-ULTRAFLUID D products is 36 month as from the date of
manufacture, provided they are maintained in their original packaging
under adequate conditions. |
|
PACKING |

|
EMPOL-ULTRAFLUID D 300
|
1. packing:
200/210kg(Drum) 2. Bulk:
yes
|
EMPOL-ULTRAFLUID D 401
|
1.
packing: 210/220kg(Drum) 2.
Bulk: yes
|
|
|
|
MPOL-SBF201Àº ºê·¹ÀÌÅ©¿ÀÀÏÀ» »ý»êÇϴµ¥ È¿À²¼º°ú ½Ã°£ Àý¾àÀ» À§ÇØ °³¹ßµÈ
¿ø·áÀÔ´Ï´Ù. º» Á¦Ç°Àº ºê·¹ÀÌÅ©¿ÀÀÏÀ» »ý»êÇϱâ À§ÇÏ¿© ¿©·¯°¡Áö Ȱø¾àǰÀ» ±¸¸ÅÇÏ¿© ÀûÀº·®À» »ý»êÇÒ
°æ¿ì ºÒÇÊ¿äÇÑ Àç°í°¡ ¾øÀ¸¸ç DEG30%¿ÍÀÇ È¥¿ëÀ¸·Î ¿ì¼öÇÑ ºê·¹ÀÌÅ©¿ÀÀÏÀ» »ý»êÇÒ ¼ö
ÀÖ½À´Ï´Ù. |
|
|

|
- ¿Ü °ü : ¿¬È²»ö Åõ¸í¾×ü
- 0 P H : 9.0 ± 0.3
|
|

|
1. |
EMPOL-SBF201(70%)¿Í DEG(30%)¿ÍÀÇ È¥¿ëÀ¸·Î ºê·¹ÀÌÅ©¿ÀÀÏÀ» »ý»êÇÒ ¼ö
ÀÖ½À´Ï´Ù. (WT, %À̹ǷΠºÎÇǷΠȯ»êÇÒ °æ¿ì 1.04¹è¸¦ ÇÑ´Ù) |
2. |
»ý»êµÈ ºê·¹ÀÌÅ©¿ÀÀÏÀº Ȳ»êȼº, ±Ý¼Ó ºÎ½Ä¼º, °í¹« ÆØÀ±¼º, Áõ¹ß¼º, ¾ÈÁ¤¼º, ³»¼ö¼º, ³»ÇѼº, ½ºÆ®·ÎÅ· ¼º´É ½ÃÇè¹× ÀÏ¹Ý Ç׸ñ¿¡¼ ¿ì¼öÇÑ ¼ºÀûÀ» ³ªÅ¸³À´Ï´Ù ÷°¡ÇÏ¿© ±³¹Ý½ÃŰ´Â
°ÍÀÌ ½Ã°£ Àý¾à°ú Á¦Ç°À» À§ÇÑ ÁÁÀº ¹æ¹ýÀÌ´Ù. |
|
|
|
|